Laying linoleum do it yourself

During the renovation of the apartment, an important part is the replacement of the flooring. Such a coating as linoleum is very popular in the modern world. Its main advantages are:
1. Low cost;
2. Water-resistant;
3. Wear resistance.
Laying linoleum do it yourself

In addition to all this, it is worth adding a huge number of different colors, thanks to which, this flooring will perfectly fit into any kitchen interior. When self-laying linoleum, you can save on workers, especially since, for this type of repair work, you do not need special knowledge and skills. For laying linoleum, you will need the following tools:
1. Construction glue;
2. Pencil;
3. Roulette;
4. Special scissors;
5. Screwdriver;
6. Self-tapping screws.
We begin by removing all objects on the floor from the room. If the room has a plinth, then you need to remove it. Next you need to remove the old flooring, clean the floor from dust and debris with a vacuum cleaner or a broom.It is worth bothering about measurements in advance, to the length and width, you need to add 5 centimeters, as the walls may not be even and there may not be enough linoleum.
When starting laying linoleum it is worth remembering that the temperature in the room must be at least 15 degrees. Linoleum after the purchase must "otlezhatsya", in order to avoid bends and creases. A day before getting started, spread this flooring on a clean floor, in the order in which you plan to lay it.
The ideal option would be if the linoleum will be whole. If you have to lay it out of several pieces, then make sure that the seams were in the middle. When applying linoleum to the walls, do not forget about the fact that there should be no big overlap, then you will cut off the excess. Cut linoleum is recommended with special scissors, noting in advance the point of contact with the wall.
Laying linoleum do it yourself

Laying linoleum do it yourself

Laying linoleum do it yourself

In a small room linoleum can be fixed with the help of a plinth. If the room is large, you will need construction glue. Also, this applies to those premises where there is a large power load on the floor. After laying this flooring, it is necessary to fix it with a plinth. In order to avoid the bending of linoleum in the doorway, it is recommended to fasten it with self-tapping screws.

Related news

Laying linoleum do it yourself image, picture
Laying linoleum do it yourself 58


Laying linoleum do it yourself 81


Laying linoleum do it yourself 61


Laying linoleum do it yourself 98


Laying linoleum do it yourself 25


Laying linoleum do it yourself 67


Laying linoleum do it yourself 100