How to make slippers from slaps

Today I want to tell you how easy and simple it is to make wonderful slippers out of ordinary slaps. Their advantage is that there is no foam in them, which accumulates microbes, and is washed out of washing and, in fact, is short-lived. That is, sneakers can be safely washed, without fear of throwing them away after washing.
How to make slippers from slaps

The first step is to make an insole. To do this, we trace the sole slap
How to make slippers from slaps

Now we need to close the top of the slap. And for this it is necessary to map out a pattern on any thin paper such as a newspaper or advertising leaflets, applying a slap to the top of the slap and tracing out the contours.
How to make slippers from slaps

Then we cut out our thick insole from the denim type of our insole and the top of the future slipper. Glue on the silicone sealant or rubber glue. The advantage of the sealant is that it does not stain the fabric, does not leave stains when glued, a drawback - when used, air penetrates into the tube and then almost half of the sealant turns into a solid silicone, so it should be used immediately.
How to make slippers from slaps

When the dense fabric backing is ready and the relief of the slap is closed, you can proceed to the front of the sneaker.For this, a fabric from an old payta with a fleece surface inside came up, but you can use any cloth such as a bike. Fold the front side of the fabric inside and outline the insole with a marker on the model and cut out.
How to make slippers from slaps

In the same way, mark the contour of the top sneaker and cut out.
How to make slippers from slaps

Then glue the insole with the fleece side up and the top with the fleece side down.
How to make slippers from slaps

The advantage of the fabric from the payta is that it is not frayed, but still it is necessary to close the sections of the fabric for beauty. I still have a piece of lace tape, which is very handy to decorate the sneaker. The edges of the tape were cut and used as a border for the top sneaker. Also in the store Sewing World were discovered these wonderful flowers with glue backing. They very opportunely fit into the color of the sneaker and the rims and were glued. It is necessary to glue with the help of ironing the iron on top of the flower.
How to make slippers from slaps

And that's what happened!
How to make slippers from slaps

Related news

How to make slippers from slaps image, picture, imagery


How to make slippers from slaps 48


How to make slippers from slaps 94


How to make slippers from slaps 50


How to make slippers from slaps 29


How to make slippers from slaps 64


How to make slippers from slaps 66


How to make slippers from slaps 98